A guide for laser cutting and engraving with diagram showing different cut lines: blue for inner cut, green for outline cut, black for engraving, and red for scribing. The example artwork displays an arch with the text 'Arch 60' in bold black and red.

MATERIALS

We can cut most wood up to a thickness of around 10mm, plastics that don’t contain PVC and card of any thickness. We aren’t able to cut any stone, glass or metals, though we may be able to mark the surface with our laser. The maximum size of materials that our laser can accept is 1200×700mm.

If you would like us to work with a material, please contact us and if we think it is safe to work with, can usually test a small sample to ensure you get the best results.

We keep a good stock of our most popular options in our workshop, including:
-Birch backed poplar ply from 3mm to 12mm
-MDF from 3mm to 12mm
-3mm clear acrylic
-1.4mm Snow White mountboard
-1.2mm Black core mountboard
-Oiled Manila stencil card
-Mylar stencil plastic

Other materials can be ordered in to be cut, usually within 2-3 working days!

A laser cut architectural model featuring a multi-tiered structure with a small tree at the top, made of layered finnboard.
a laser engraved replica of an isolinear chip from Star Trek TNG produced in light gathering orange acrylic
Decorative laser cut lantern with intricate cut-out patterns illuminated from within, casting warm light and shadows.
LASER GALLERY
Two wooden guitar headstocks with a circuit board design, made from inlaying laser cut plywood.
CONTACT US